Anti-AliasingThe quality of the screen presentation iis strongly improved with the anti-aliasing-technology. Edges are smoothed and the layout is looking much more realistic, even in small zoom modes.
Automatic Ground PlaneThis function fills unused areas of a layout with copper automatically. This accelerates the corroding process and saves corroding material. You may also use this function to create a screen for HF-boards. You can also define thermal-pads on the automatic ground-plane.
Test functionThis function is very helpful to check your layout. You can click on any position of your layout, and Sprint-Layout will find all connected layout-elements, and light them up. This makes it very easy to check the signal flow of the layout.
The AutorouterThere is simple point-to-point autorouter integrated in Sprint-Layout. This autorouter is able to connect two points of your layout. These two points are defined with a connection (rubberband). The autorouter was not designed, to generate whole boards at once. This is usually not possible. To create a proper layout, you have to design it mostly by yourself. The autorouter in Sprint-Layout is designed as an easy to use autorouter. You don't have to make obscure specifications and options. The autorouter is as simple as the whole software.
High resolution and accuracyThe resolution and the accuracy of Sprint-Layout was increased substantially. This concerns also the grid settings and the maximum zoom factor. It is now possible to define a grid-value up to 1µm. So it is no problem to design even very fine layout structures. Also the selection of a special grid-value with the grid-menu is very easy. Just select the desired value from the popup-menu, which is filled with all default grid-values, either in inch or metric values. Of course you can easily extend this grid-menu with your own-defined grid-values. You can change the current grid also with the numeric keys 1-9 on your keyboard. Thes keys are working as hotkeys with predefined grid-values.
The Footprint-WizardThe footprint-wizard helps you to create special footprints for components. You can specify the footprint-type and the parameters and the wizard creates your footprint automatically. Every footprint-type has different parameters. These parameters are displayed and explained in a little picture in the footprint-wizard. All changes that you made will be displayed in the preview immediately. If you have set all parameters, the footprint-wizard creates the footprint and you can place it on your layout.
Properties-PanelThe properties-panel offers the possibility to edit all important properties of your layout-elements without calling special dialogs. Besides you can edit here special properties like positions, etc. The properties-panel responds on the current selection on your layout. Just select the desired element and edit its properties directly in this panel. All changes that you make in this panel will be displayed on your layout immediately, so you can always see the result of your changes. With the help of the multi-selection possibilty, you can even change properties of as many elements as you like at one go.
The SelectorThe Selector is a mighty tool. You can use it to search and select special elements on your layout. So it is possible to search and select all pads with a special shape or size. If the desired elements are selected, they can be changed in common with the properties-panel. The Selector can also help to analyze your layout. So you can list e.g. all tracks sorted by their widths. Such lists can help you to find unwanted elements.
Scanned copiesYou can load a bitmap in the background of your layout. This bitmap can be a scanned-copy from an existing layout. You can use this bitmap as an original to trace the layout. The bitmap must be available as a bitmap file (BMP or JPG). The resolution should be between 300-600 dpi. A pure B/W color depth is recommended, but not absolutely necessary.
PrintingVarious options are available to print your layouts, solder masks, component-mounting-plans, silk-screens or drilling-plans on paper sheets or transparent film. The printout position is adjustable and the tile-option allows you to repeat the printout of small designs in x- and y-direction, to save film and material. The printout can be scaled. All changes you make will be displayed in the preview immediately.
Higher resolution and accuracyThe resolution and the accuracy of Sprint-Layout is increased tenfold. This concerns also the grid settings and the maximum zoom factor. So there is no problem to design very fine layout structures.
SelectorThe new selector is a powerful tool. With this tool you can find and select specific elements of your layout, and edit them simultaneously with the help of the new multiselect-function. For example, you can select and edit all pads with a specific shape or drilling.
Former GV design partner Jake Knapp began running design sprints at Google in 2010. He worked with teams like Chrome, Google Search and Google X. In 2012, Jake brought sprints to GV, and the rest of the team chipped in their expertise to perfect the process.
For this chart to be accurate, estimation in the beginning of the sprint is critical. The chart uses the estimates to draw that guideline. What are the flat spots in the guideline? Jira Software has the ability to specify non-working days in your sprints.
Some teams like to assign out work at the sprint planning meeting, and often times someone creating an issue will assign it to a specific team member right off the bat. You can use the Assigned to Me gadget so that each team member gets a gadget listing their work. Setting this gadget up is as easy as it gets. Just add it to your dashboard, leave all the default settings in place, and save it. Boom.
Sprint Layout 6.0 is an application which is used to design and edit the printed circuit board layouts. With this software you can get all the necessary features to create single sided or double sided PCBs from scratch. You can also download Cadsoft EAGLE Professional.
This software comes wrapped in a clean and neat user interface. It is easy to use and lets you work more efficiently. Sprint Layout 6.0 delivers you many handy tools which are used to create the board designs, such as solder pads, SMD pads, tracks, zones and many others. There are hotkeys which you can use and assign for specific function. There is a built in auto router which helps you route the tracks, and a previewing function for the PCB layout. There is a widespread library with the components for SMD layouts. You can also add your own designed components. It supports multi-tabbed experience so that you can create several boards at a time. Altogether this is very special and useful software. You may also like to download CAMCAD PCB Translator.
Design the UX FrameworkThis step is optional, but I recommend developing a UX Framework if you have a complex product and need a good starting point. Utilizing the analysis from the user research in Sprint 0, the Design Lead can develop the highest priority user flows as well as a few UX templates (e.g. Home page, Content page, etc.) that the UX team can use as a starting point for the digital product. It provides guidance on broader user experience by encapsulating the essence of the UX Strategy & Vision, as well as the Design Principles. It will serve as the initial user experience hypothesis, that the design team can utilize for design iterations and testing, where it can include a few of the following: content layout and structure, navigation, user flows, etc.
Download Sprint Layout 6.0 free latest version offline setup for Windows 32-bit and 64-bit. Sprint Layout 6.0 is a professional application for creating printed circuit board layouts and supports creating single- and double-sided PCB designs.
Comparison of the fastest 15m sprint time, mean time for 7 sprints and total sprint time (secondary Y axis) for the 7×15m ROIST between forwards and defense in women ice hockey players. Values are M ± SD. * = forwards significant different from defense, main effect, p < 0.05.
Movement patterns of female ice hockey players during game play include maximal short distance sprinting within a shift that may be repeated over all three periods of a game (4, 31, 16, 21, 22). It has also been suggested that forward linear skating speed is a valuable trait for ice hockey players (16, 29). Previous research has examined a variety of different on-ice field tests for women (4, 7, 15, 22) and men (1, 5, 13, 27, 28, 32, 33) that often include sprinting as a component of the test. However, these latter tests vary in many aspects such as the distance covered (6 to 127m), time to complete (a few seconds to a few minutes), intensity (less than maximal to all-out sprinting), the number of sprint repetitions and may include other hockey related skills or agility movements. Using maximal on-ice sprint tests that are too long or include stops, turnarounds among other movements may not accurately reflect linear maximal sprinting ability and the ability to repeat this type of sprinting. As well, there is no single test that has emerged as the gold standard for repeated sprint performance of ice hockey players.
There were several limitations in the present study. First a convenience sample was used and the sample size was small especially for the comparison of player positions. However, the sample size was similar to other research that has published reliability analyses of different on ice testing of ice hockey players (6, 7, 8). The validity of the 7×15m ROIST was based on face validity and previously published observations (21). The present test was not intended to assess other aspects of player movements that occur during ice hockey game play in a single test and was specifically designed to assess repeated linear maximal sprint skating. It was difficult to completely ensure each player was performing maximally on each repeated sprint; however, the participants were highly skilled players with several years of training and competitive experience and were highly motivated to do their best during all testing. Finally, timing can be done with any system but photo cells, dual photo cells or video are recommended (6, 20, 23, 34). 2b1af7f3a8